Protocol Encryption

From wiki.vg
Jump to navigation Jump to search

As of 12w17a, Minecraft uses encrypted connections for online-mode servers.

Overview

  1. CS: Handshake State=2
  2. CS: Login Start
  3. SC: Encryption Request
  4. Client authentication
  5. CS: Encryption Response
  6. Server authentication, both enable encryption
  7. SC: Login Success

See Protocol FAQ for a full list of packets exchanged after encryption.

Server ID String

Update (1.7.x): The server ID is now sent as an empty string. Hashes also utilize the public key, so they will still be correct.

Pre-1.7.x: The server ID string is a randomly-generated string of characters with a maximum length of 20 code points (the client disconnects with an exception if the length is longer than 20).

The client appears to arrive at incorrect hashes if the server ID string contains certain unprintable characters, so for consistent results only characters with code points in the range U+0021-U+007E (inclusive) should be sent. This range corresponds to all of ASCII with the exception of the space character (U+0020) and all control characters (U+0000-U+001F, U+007F).

The client appears to arrive at incorrect hashes if the server ID string is too short. 15 to 20 (inclusive) length strings have been observed from the Notchian server and confirmed to work as of 1.5.2.

Key Exchange

The server generates a 1024-bit RSA keypair on startup. The public key sent in the Encryption Request packet is encoded in ASN.1 DER format. This is a general-purpose binary format common in cryptography, conceptually similar to NBT. The schema is the same as the SubjectPublicKeyInfo structure defined by X.509 (not a full-blown X.509 certificate!):

SubjectPublicKeyInfo ::= SEQUENCE {
  algorithm SEQUENCE {
    algorithm         OBJECT IDENTIFIER
    parameters        ANY OPTIONAL
  }
  subjectPublicKey  BIT STRING
}

SubjectPublicKey ::= SEQUENCE {
  modulus           INTEGER
  publicExponent    INTEGER
}

(See the #Additional Links section of this article for further information.)

If you're struggling to import this using a crypto library, try to find a function that loads a DER encoded public key. If you can't find one, you can convert it to the more common PEM encoding by base64-encoding the raw bytes and wrapping the base64 text in '-----BEGIN PUBLIC KEY-----' and '-----END PUBLIC KEY-----'. See this example of a PEM encoded key: https://git.io/v7Ol9

It is also possible for a modified or custom server to use a longer RSA key, without breaking official clients.

Symmetric Encryption

On receipt of a Encryption Request from the server, the client will generate a random 16-byte shared secret, to be used with the AES/CFB8 stream cipher. It then encrypts it with the server's public key (PKCS#1 v1.5 padded), and also encrypts the verify token received in the Encryption Request packet in the same way, then sends both to the server in a Encryption Response packet. Both byte arrays in the Encryption Response packet will be 128 bytes long because of the padding. This is the only time the client uses the server's public key.

:!: In your crypto library, ensure that you set up your "feedback/segment size" to 8 bits or 1 byte, as indicated in the name AES/CFB8. Any other feedback size will result in encryption mismatch.

The server decrypts the shared secret and token using its private key, and checks if the token is the same. It then sends a Login Success, and enables AES/CFB8 encryption. For the Initial Vector (IV) and AES setup, both sides use the shared secret as both the IV and the key. Similarly, the client will also enable encryption upon sending Encryption Response. From this point forward, everything is encrypted. Note: the entire packet is encrypted, including the length fields and the packet's data.

The Login Success packet is sent encrypted.

:!: Note that the AES cipher is updated continuously, not finished and restarted every packet.

Authentication

Both server and client need to make a request to sessionserver.mojang.com if the server is in online-mode.

Client

After generating the shared secret, the client generates the following hash:

sha1 := Sha1()
sha1.update(ASCII encoding of the server id string from Encryption Request) 
sha1.update(shared secret) 
sha1.update(server's encoded public key from Encryption Request) 
hash := sha1.hexdigest()  # String of hex characters

:!: Note that the Sha1.hexdigest() method used by minecraft is non standard. It doesn't match the digest method found in most programming languages and libraries. It works by treating the sha1 output bytes as one large integer in two's complement and then printing the integer in base 16, placing a minus sign if the interpreted number is negative. Some examples of the minecraft digest are found below:

sha1(Notch) :  4ed1f46bbe04bc756bcb17c0c7ce3e4632f06a48
sha1(jeb_)  : -7c9d5b0044c130109a5d7b5fb5c317c02b4e28c1
sha1(simon) :  88e16a1019277b15d58faf0541e11910eb756f6

The resulting hash is then sent via an HTTP POST request to

https://sessionserver.mojang.com/session/minecraft/join

With the following sent as post data, Content-Type: application/json

  {
    "accessToken": "<accessToken>",
    "selectedProfile": "<player's uuid without dashes>",
    "serverId": "<serverHash>"
  }

The fields <accessToken> and the player's uuid were received by the client during authentication.

If everything goes well, the client will receive a "HTTP/1.1 204 No Content" response.

The server will respond with "HTTP/1.1 403 Forbidden" if the player's Xbox profile has multiplayer disabled, with the following response:

{
    "error": "InsufficientPrivilegesException",
    "path": "/session/minecraft/join"
}

Similarly, if the player was banned from Multiplayer then the server will respond with the following error:

{
    "error": "UserBannedException",
    "path": "/session/minecraft/join"
}

Server

After decrypting the shared secret in the second Encryption Response, the server generates the login hash as above and sends a HTTP GET to

https://sessionserver.mojang.com/session/minecraft/hasJoined?username=username&serverId=hash&ip=ip

The username is case insensitive and must match the client's username (which was received in the Login Start packet). Note that this is the in-game nickname of the selected profile, not the Mojang account name (which is never sent to the server). Servers should use the name sent in the "name" field.

The ip field is optional and when present should be the IP address of the connecting player; it is the one that originally initiated the session request. The notchian server includes this only when prevent-proxy-connections is set to true in server.properties.

The response is a JSON object containing the user's UUID and skin blob

{
    "id": "<profile identifier>",
    "name": "<player name>",
    "properties": [ 
        {
            "name": "textures",
            "value": "<base64 string>",
            "signature": "<base64 string; signed data using Yggdrasil's private key>"
        }
    ]
}

The "id" and "name" fields are then sent back to the client using a Login Success packet. The profile id in the json response has format "11111111222233334444555555555555" which needs to be changed into format "11111111-2222-3333-4444-555555555555" before sending it back to the client.

Sample Code

Examples of generating Minecraft-style hex digests:

Additional Links

DER Encoding of ASN.1 Types

A Layman's Guide to a Subset of ASN.1, BER, and DER

Serializing an RSA Key Manually

Encrypt shared secret using OpenSSL

Generate RSA-Keys and building the ASN.1v8 structure of the x.509 certificate using Crypto++

Decrypt shared secret using Crypto++

De/Encrypt data via AES using Crypto++

C# AES/CFB support with bouncy castle on Mono