Chunk Format

From wiki.vg
Revision as of 02:36, 6 December 2015 by Rom1504 (talk | contribs) (→‎Implementations: add node.js implementation)
Jump to navigation Jump to search

This page gives an overview of the SMP map format used in the protocol.

Packets

Two packets use this format:

  • 0x21 chunk data - single column - used when player movement requires new chunks to be loaded. Also used to unload chunks.
  • 0x26 map chunk bulk - multiple columns - used when first spawning into a world and when player is teleported.

Concepts

Storage

  • Chunk Data: an array, either 2048 or 4096 bytes
  • Chunk: a 16x16x16 area, logically made up of multiple Chunk Data arrays, storing things like block ids and skylight
  • Chunk Column: 16 chunks aligned vertically (totalling 16x256x16). Chunks can be uninitialised (e.g. set to null)
  • World: a collection of chunk columns

Bitmasks

You will sometimes get a blob of data and a bitmask. Each bit in the 16-bit short represents a chunk. The least significant bit represents the chunk from Y=0 to Y=15, and so forth. If it's 0, the chunk is entirely air and there's no data to read.

You need a loop like this:

chunks = array[16];
for (i=0; i<16; i++) {
    if (bitmask & (1 << i)) {
        // read a chunk data array
    }
}

Format

Chunk Column Metadata

The packet contains important metadata which you'll need to pull out. For bulk packets, you'll need to loop over the metadata area. Specifically:

  • Chunk X
  • Chunk Z
  • Section Bitmask
  • Continuous? (only in 0x21 - assumed true in 0x26)
  • Skylight? (only in 0x26 - only if overworld in 0x21)

Data

See also: Pre-release protocol#Chunk Section for the new format in 1.9
  • In 0x21 the data describes of a single chunk column in the format below.
  • In 0x26, the format below is repeated for each chunk column.
    • Chunks are sent bottom-to-top, i.e. the first chunk, if sent, extends from Y=0 to Y=15. Blocks are ordered Y, Z, X, i.e. the 'X' coordinate changes fastest.

In half-byte arrays, two values are packed into each byte. Even-indexed items are packed into the high bits, odd-indexed into the low bits.


Section Misc Contains
Array of Blocktypes and metadata Encoded with block[y][z][x] = block_id << 4, | meta_data & 15 Block ID and metadata
Decoded with blockid = block[y][z][x] >> 4; metadata = block[y][z][x] & 15
Varint of bits of light data per block (8 for both arrays, 4 for just block light, see below)
Varint of both array's total elements Blocks represented (16*16*16) * number of light arrays (1 or 2)
Array of block light data Each element is 1/2 byte , corresponds to block type and data position 0 - 15 light level
Array of skylight data (optional depending) Each element is 1/2 byte, corresponds to block type and data position 0 - 15 light level from sun
Biome ID array, each element a byte (Sent with packet 0x26) Corresponds to each z,x value, 256 elements. Comes Last after everything else. (Is not repeated for every chunk column) Biome ID



The 'biome' array is always 256 bytes when sent.

Implementations