Classic Protocol

Documentation on the server protocol used by the Minecraft Classic Creative server.

Minecraft.net Communication

Heartbeats

To be able to connect to a server in Minecraft Classic from the server list, a server must broadcast a so-called "heartbeat" every few minutes.

The stock server broadcasts this heartbeat every 45 seconds.

A "heartbeat" takes the form of an HTTP request to http://www.minecraft.net/heartbeat.jsp. The server list has since been shut down. After sending a heartbeat, the URL for the server is returned.

It can be a GET or POST request. A table of the required parameters is below:

Name	Details
port	Port number of the server. This is usually 25565
max	Maximum number of players allowed on the server
name	The name of the server
public	Whether the server is public (i.e. appears in the server list) or not. Can be True or False, in that capitalization.
version	Protocol version number, this should be 7 unless you're using a client version older than 0.28.
salt	A random, 16-character base-62 salt
users	Number of users connected to the server

The simplest way to send a heartbeat is to open a TCP socket to port 80 to the server list, and send the following (with the values changed, obviously):

GET /heartbeat.jsp?port=25565&max=32&name=My%20Server&public=True&version=7&salt=wo6kVAHjxoJcInKx&users=0, plus a CRLF(Carriage-return and Line feed).

Make sure any strings, like name, are escaped.

If everything goes well, in the response body you'll receive a URL to the server. Otherwise you'll get a nice HTML error message. There aren't any HTTP headers to parse, as the HTTP version is not specified so HTTP/0.9 is used, which does not have headers.

User Authentication

The "key" provided when a user joins the server can be compared to the MD5 checksum of the server's "salt" plus the username to verify that the user is logged in to minecraft.net with that username. This is useful for establishing enough trust of the name provided to ban or op the player by name.

if (player.key == md5(server.salt + player.name)) {
 // player is logged in via minecraft.net
} else {
 // player is forging the username
}

Note: This means that you should make sure your "salt" is kept a secret and shared only with heartbeat.jsp. If your server's "salt" is visible anywhere to users, it is trivial for users to produce valid-looking "key"s without being logged in to minecraft.net.

Skins

Skins for a player are downloaded by the client from http://minecraft.net/skin/skinname.png, where skinname is the name of the player. This means that the name for a player can be faked to give a desired skin.

Packet Protocol

The connection is done over TCP. Every packet starts with a byte representing the Packet ID.

Protocol Data Types

For details on fields such as player IDs and position, see below.

All numbers are in network order (big-endian). Signed integers are in two's compliment.

The last 5 bits of the fixed-point types are fractional, i.e. they come after the "point". You can think of these as 32ths of a block (2⁵=32). To convert to a block position (integer), it needs to be rounded down, this is equivalent to an arithmetic shift right by 5.

Type	Bytes	Description
Byte	1	Unsigned byte (0 to 255)
SByte	1	Signed byte (-128 to 127)
FByte	1	Signed fixed-point, 5 fractional bits (-4 to 3.96875)
Short	2	Signed integer (-32768 to 32767)
FShort	2	Signed fixed-point, 5 fractional bits (-1024 to 1023.96875)
String	64	UTF-8 encoded string padded with spaces (0x20)
Level Data	1024	Binary data padded with null bytes (0x00)

Client → Server packets

Packet ID	Purpose	Field Description	Field Type	Notes
0x00	Player Identification	Packet ID	Byte	Sent by a player joining a server with relevant information. The protocol version is 0x07, unless you're using a client below 0.28.
		Protocol version	Byte
		Username	String
		Verification key	String
		Unused	Byte (0x00)
0x05	Set Block	Packet ID	Byte	Sent when a user changes a block. The mode field indicates whether a block was created (0x01) or destroyed (0x00). Block type is always the type player is holding, even when destroying. Client assumes that this command packet always succeeds, and so draws the new block immediately. To disallow block creation, server must send back Set Block packet with the old block type.
		X	Short
		Y	Short
		Z	Short
		Mode	Byte
		Block type	Byte
0x08	Position and Orientation	Packet ID	Byte	Sent frequently (even while not moving) by the player with the player's current location and orientation. Player ID is always -1 (255), referring to itself.
		Player ID	SByte (0xFF)
		X	FShort
		Y	FShort
		Z	FShort
		Yaw (Heading)	Byte
		Pitch	Byte
0x0d	Message	Packet ID	Byte	Contain chat messages sent by player. Player ID is always -1 (255), referring to itself. This may contain color codes.
		Player ID	SByte (0xFF)
		Message	String

Server → Client packets

Packet ID	Purpose	Field Description	Field Type	Notes
0x00	Server Identification	Packet ID	Byte	Response to a joining player. The user type indicates whether a player is an op (0x64) or not (0x00) which decides if the player can delete bedrock. The protocol version is 0x07, unless you're using a client below 0.28.
		Protocol version	Byte
		Server name	String
		Server MOTD	String
		User type	Byte
0x01	Ping	Packet ID	Byte	Sent to clients periodically. The only way a client can disconnect at the moment is to force it closed, which does not let the server know. The ping packet is used to determine if the connection is still open.
0x02	Level Initialize	Packet ID	Byte	Notifies the player of incoming level data.
0x03	Level Data Chunk	Packet ID	Byte	Contains a chunk of the gzipped level data, to be concatenated with the rest. Chunk Data is up to 1024 bytes, padded with 0x00s if less.
		Chunk Length	Short
		Chunk Data	Level Data
		Percent Complete	Byte
0x04	Level Finalize	Packet ID	Byte	Sent after level data is complete and gives map dimensions. The y coordinate is how tall the map is.
		X Size	Short
		Y Size	Short
		Z Size	Short
0x06	Set Block	Packet ID	Byte	Sent to indicate a block change by physics or by players. In the case of a player change, the server will also echo the block change back to the player who initiated it.
		X	Short
		Y	Short
		Z	Short
		Block Type	Byte
0x07	Spawn Player	Packet ID	Byte	Sent to indicate where a new player is spawning in the world. This will set the player's spawn point.
		Player ID	SByte
		Player Name	String
		X	FShort
		Y	FShort
		Z	FShort
		Yaw (Heading)	Byte
		Pitch	Byte
0x08	Set Position and Orientation (Player Teleport)	Packet ID	Byte	Sent with changes in player position and rotation. Used for sending initial position on the map, and teleportation. Some servers don't send relative packets, opting to only use this one.
		Player ID	SByte
		X	FShort
		Y	FShort
		Z	FShort
		Yaw (Heading)	Byte
		Pitch	Byte
0x09	Position and Orientation Update	Packet ID	Byte	Sent with changes in player position and rotation. Sent when both position and orientation is changed at the same time. Not required for server operation.
		Player ID	SByte
		Change in X	FByte
		Change in Y	FByte
		Change in Z	FByte
		Yaw (Heading)	Byte
		Pitch	Byte
0x0a	Position Update	Packet ID	Byte	Sent with changes in player position. Not required for server operation.
		Player ID	SByte
		Change in X	FByte
		Change in Y	FByte
		Change in Z	FByte
0x0b	Orientation Update	Packet ID	Byte	Sent with changes in player rotation. Not required for server operation.
		Player ID	SByte
		Yaw (Heading)	Byte
		Pitch	Byte
0x0c	Despawn Player	Packet ID	Byte	Sent to others when the player disconnects.
		Player ID	SByte
0x0d	Message	Packet ID	Byte	Messages sent by chat or from the console. This may contain color codes.
		Player ID	SByte
		Message	String
0x0e	Disconnect Player	Packet ID	Byte	Sent to a player when they're disconnected from the server. "Cheat detected: Distance" - happens not only when setting tile too far away from the player (how far is maximum distance and how it is measured?), but also when player moves and then immediately builds. "Cheat detected: Tile type" "Cheat detected: Too much clicking!" "Cheat detected: Too much lag" "Cheat detected: Bad name!" "Cheat detected: Bad chat message!"
		Disconnect reason	String
0x0f	Update User Type	Packet ID	Byte	Sent when a player is opped/deopped. User type is 0x64 for op, 0x00 for normal user. This decides if the player can delete bedrock.
		User type	Byte

Version differences

Differences in protocol versions relative to protocol 7.

Note: Unless specified otherwise, differences usually carry over to all previous protocols.

Protocol version	Differences
6	The highest supported block is 41 (gold block).
5	User type is not implemented. As such, Update User Type is not implemented and the identification packet lacks the "User type" byte in both directions. The highest supported block is 20 (glass).
4	The highest supported block is 18 (leaves). Set Position And Orientation (Teleport) does not work on ID -1 (255), as such SpawnPlayer must be used instead.
3	Name verification was not implemented yet (although the identification packet is the same). Spawn Player packet behaves differently with ID -1 (255). yaw and pitch fields are swapped and pitch is inverted (256-pitch).
1/c0.0.15a (mptest 1)	The identification packet only consists of the packet id and username. When the server identifies itself, the string is unused by the client. There is no chat in this version. The "Despawn Player" packet has an ID of 0x09, but the same contents.

Player IDs

Player IDs are treated as a signed byte.

The client is never told it's own player ID, when referencing itself the ID of -1 (255) is always used.

Some clients (notably the original), accept any negative number (128-255) as meaning the client itself, others only accept -1. This means that some clients can handle players with IDs less than -1, and others will combine them with itself.

Player Position

Standing On Things

A player's position corresponds to the center of the client viewport.

The bottom of the player's feet is located 1.59375 (fixed-point: 51) units below the center of the viewport, so to position the player on top of a particular block you could send a teleport (0x08) packet specifying a Y value based on the block position as: (Y x 32 + 51)

Orientation

A yaw value of 0 means the player is facing in the Z=0 (negative Z) direction. This value increases in a clockwise direction as seen from above. If we call the negative Z direction "North", then a yaw of 64 means "East", 128 means "South", and 192 means "West".

A pitch value of 0 means level and this value increases in a downward direction. 64 is down, and 192 is up. Values of 65 to 191 should never occur because the player cannot look further up or down than the 64 → 0, 255 → 192 range. However, the Minecraft Classic client does not ignore invalid values, so it is possible to make players' heads "upside-down".

Level Data

Level data is an array of block types, as bytes in XZY order. XZY order means you first increment the X, then the Z, then the Y.

Before being sent to the client, it is prefixed with its length as a big-endian int (4 bytes), and then gzipped (not zlib or plain deflate). This is then split into 1024 byte chunks, to be sent to the client in Level Data Chunk packets. The final chunk is padded with 0x00 bytes.

When the client receives a data chunk, it should concatenate it to the end of the previous chunks, only stripping 0x00s from the end of the final one. The entire data should then be gzip inflated.

Color Codes

Messages sent from the server to the client can contain color codes, which allow coloring of text for various purposes.

An ampersand followed by a hex digit in the message tells the client to switch colors while displaying text.

Color coding at the start of the message will only work if the player ID byte is less than 127. If it's 127 or higher, the game automatically adds &e before the message, making it yellow. However, color codes after the first character still work. If you use an ID below 127, it doesn't add a color code, so the ones you use will work.

It is important to note that an ampersand at the end of a message that is not followed by a hex digit will crash all clients that receive it, so it is a must to sanitize all chat messages received from clients.

Hex digit to color mapping

Sample	Code	Common Name	Foreground Color			Background Color
			R	G	B	R	G	B
	&0	Black	0	0	0	0	0	0
	&1	Dark Blue	0	0	191	0	0	47
	&2	Dark Green	0	191	0	0	47	0
	&3	Dark Teal	0	191	191	0	47	47
	&4	Dark Red	191	0	0	47	0	0
	&5	Purple	191	0	191	47	0	47
	&6	Gold	191	191	0	47	47	0
	&7	Gray	191	191	191	47	47	47
	&8	Dark Gray	64	64	64	16	16	16
	&9	Blue	64	64	255	16	16	63
	&a	Bright Green	64	255	64	16	63	16
	&b	Teal	64	255	255	16	63	63
	&c	Red	255	64	64	63	16	16
	&d	Pink	255	64	255	63	16	63
	&e	Yellow	255	255	64	63	63	16
	&f	White	255	255	255	63	63	63