Legacy Mojang Authentication

Minecraft 1.6 introduced a new authentication scheme called Yggdrasil which completely replaces the previous authentication system. Mojang's other game, Scrolls, uses this method of authentication as well. Mojang has said that this authentication system should be used by everyone for custom logins, but credentials should never be collected from users. For newer Microsoft accounts, see Microsoft Authentication Scheme.

Request format

All requests to Yggdrasil are made to the following server:

https://authserver.mojang.com

Further, they are expected to fulfill the following rules:

• Are POST requests
• Have the Content-Type header set to application/json
• Contain a JSON-encoded dictionary as payload

If a request was successful the server will respond with:

• A successful status code 2XX
• An empty payload or a JSON-encoded dictionary according to the specifications below

If however a request fails, the server will respond with:

• An appropriate, non-200 HTTP status code
• A JSON-encoded dictionary following this format:

{
    "error": "Short description of the error",
    "errorMessage": "Longer description which can be shown to the user",
    "cause": "Cause of the error" // optional
}

Errors

These are some of the errors that can be encountered:

Error	Cause	Error message	Notes
Method Not Allowed		The method specified in the request is not allowed for the resource identified by the request URI	Something other than a POST request was received.
Not Found		The server has not found anything matching the request URI	Non-existing endpoint was called.
ForbiddenOperationException	UserMigratedException	Invalid credentials. Account migrated, use email as username.
ForbiddenOperationException		Invalid credentials. Invalid username or password.
ForbiddenOperationException		Invalid credentials.	Too many login attempts with this username recently (see /authenticate). Note that username and password may still be valid!
ForbiddenOperationException		Invalid token.	accessToken was invalid.
ForbiddenOperationException		Token does not exist.	accessToken was used in another session that was issued AFTER this session.
IllegalArgumentException		Access token already has a profile assigned.	Selecting profiles isn't implemented yet.
IllegalArgumentException		credentials is null	Username/password was not submitted.
IllegalArgumentException		Invalid salt version	???
Unsupported Media Type		The server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method	Data was not submitted as application/json
ResourceException		Gone (410) - The requested resource is no longer available at the server and no forwarding address is known	Account was migrated to Microsoft account

Authenticate

Authenticates a user using their password.

Endpoint

/authenticate

Payload

{
    "agent": {                              // defaults to Minecraft
        "name": "Minecraft",                // For Mojang's other game Scrolls, "Scrolls" should be used
        "version": 1                        // This number might be increased
                                            // by the vanilla client in the future
    },
    "username": "mojang account name",      // Can be an email address or player name for
                                            // unmigrated accounts
    "password": "mojang account password",
    "clientToken": "client identifier",     // optional
    "requestUser": true                     // optional; default: false; true adds the user object to the response
}

The clientToken should be a randomly generated identifier and must be identical for each request. The vanilla launcher generates a random (version 4) UUID on first run and saves it, reusing it for every subsequent request. In case it is omitted the server will generate a random token based on Java's UUID.toString() which should then be stored by the client. This will however also invalidate all previously acquired accessTokens for this user across all clients.

Response

{
    "user": {
        "username": "user@email.example", // will be account username for legacy accounts
        "properties": [
            {
                "name": "preferredLanguage",
                "value": "en-us"
            },
            {
                "name": "registrationCountry",
                "value": "country" // 2L country (e.g. US)
            }
        ],
        "id": "hexadecimal string" // This is the remoteID for the user
    },
    "clientToken": "client identifier",
    "accessToken": "random access token", // hexadecimal or JSON-Web-Token (unconfirmed) [The normal accessToken can be found in the payload of the JWT (second by '.' separated part as Base64 encoded JSON object), in key "yggt"]
    "availableProfiles": [
        {
            "name": "player username",
            "id": "hexadecimal string" // UUID of the account
        }
    ],
    "selectedProfile": {
        "name": "player username",
        "id": "hexadecimal string" // UUID of the account
    }
}

Note: If a user wishes to stay logged in on their computer you are strongly advised to store the received accessToken instead of the password itself.

Currently each account will only have one single profile, multiple profiles per account are however planned in the future. If a user attempts to log into a valid Mojang account with no attached Minecraft license, the authentication will be successful, but the response will not contain a selectedProfile field, and the availableProfiles array will be empty.

Some instances in the wild have been observed of Mojang returning a flat null for failed refresh attempts against legacy accounts. It's not clear what the actual error tied to the null response is and it is extremely rare, but implementations should be wary of null output from the response.

This endpoint is severely rate-limited: multiple /authenticate requests for the same account in a short amount of time (think 3 requests in a few seconds), even with the correct password, will eventually lead to an Invalid credentials. response. This error clears up a few seconds later.

Refresh

Refreshes a valid accessToken. It can be used to keep a user logged in between gaming sessions and is preferred over storing the user's password in a file (see lastlogin).

Endpoint

/refresh

Payload

{
    "accessToken": "valid accessToken",
    "clientToken": "client identifier",  // This needs to be identical to the one used
                                         // to obtain the accessToken in the first place
    "selectedProfile": {                 // optional; sending it will result in an error
        "id": "profile identifier",      // hexadecimal
        "name": "player name"
    },
    "requestUser": true                  // optional; default: false; true adds the user object to the response
}

Note: The provided accessToken gets invalidated.

Response

{
    "accessToken": "random access token",      // hexadecimal
    "clientToken": "client identifier",        // identical to the one received
    "selectedProfile": {
        "id": "profile identifier",            // hexadecimal
        "name": "player name"
    },
    "user": {                                  // only present if requestUser was true in the request payload
        "username": "user@email.example",      // email for Mojang accounts or account username for legacy Minecraft accounts
        "id": "user identifier",               // hexadecimal
        "properties": [
            {
                "name": "preferredLanguage",   // might not be present for all accounts
                "value": "en"                  // Java locale format (https://docs.oracle.com/javase/8/docs/api/java/util/Locale.html#toString--)
            },
            {
                "name": "twitch_access_token", // only present if a twitch account is associated (see https://account.mojang.com/me/settings)
                "value": "twitch oauth token"  // OAuth 2.0 Token; alphanumerical; e.g. https://api.twitch.tv/kraken?oauth_token=[...]
                                               // the Twitch API is documented here: https://github.com/justintv/Twitch-API
            }
        ]
    }
}

Validate

Checks if an accessToken is usable for authentication with a Minecraft server. The Minecraft Launcher (as of version 1.6.13) calls this endpoint on startup to verify that its saved token is still usable, and calls /refresh if this returns an error.

Note that an accessToken may be unusable for authentication with a Minecraft server, but still be good enough for /refresh. This mainly happens when one has used another client (e.g. played Minecraft on another PC with the same account). It seems only the most recently obtained accessToken for a given account can reliably be used for authentication (the next-to-last token also seems to remain valid, but don't rely on it).

/validate may be called with or without a clientToken. If a clientToken is provided, it should match the one used to obtain the accessToken. The Minecraft Launcher does send a clientToken to /validate.

Endpoint

/validate

Payload

{
    "accessToken": "valid accessToken",
    "clientToken": "associated clientToken" // optional, see above
}

Response

Returns an empty payload (204 No Content) if successful, an error JSON with status 403 Forbidden otherwise.

Signout

Invalidates accessTokens using an account's username and password.

Endpoint

/signout

Payload

{
    "username": "mojang account name",
    "password": "mojang account password"
}

Response

Returns an empty payload if successful.

Invalidate

Invalidates accessTokens using a client/access token pair.

Endpoint

/invalidate

Payload

{
    "accessToken": "valid accessToken",
    "clientToken": "client identifier"   // This needs to be identical to the one used
                                         // to obtain the accessToken in the first place
}

Response

Returns an empty payload if successful.

Joining a Server

See Protocol Encryption#Authentication

Examples

Kotlin | Full Yggdrasil wrapper in Kotlin.

Java | Legacy full Yggdrasil wrapper in Java.