Data types

This article defines the data types used in the protocol. All data sent over the network (except for VarInt and VarLong) is big-endian, that is the bytes are sent from most significant byte to least significant byte. The majority of everyday computers are little-endian, therefore it may be necessary to change the endianness before sending data over the network.

Definitions

Name	Size (bytes)	Encodes	Notes
Boolean	1	Either false or true	True is encoded as 0x01, false as 0x00.
Byte	1	An integer between -128 and 127	Signed 8-bit integer, two's complement
Unsigned Byte	1	An integer between 0 and 255	Unsigned 8-bit integer
Short	2	An integer between -32768 and 32767	Signed 16-bit integer, two's complement
Unsigned Short	2	An integer between 0 and 65535	Unsigned 16-bit integer
Int	4	An integer between -2147483648 and 2147483647	Signed 32-bit integer, two's complement
Long (Actually a C Long Long)	8	An integer between -9223372036854775808 and 9223372036854775807	Signed 64-bit integer, two's complement
Float	4	A single-precision 32-bit IEEE 754 floating point number
Double	8	A double-precision 64-bit IEEE 754 floating point number
String (n)	≥ 1 ≤ (n×4) + 3	A sequence of Unicode scalar values	UTF-8 string prefixed with its size in bytes as a VarInt. Maximum length of n characters, which varies by context; up to n × 4 bytes can be used to encode n characters and both of those limits are checked. Maximum n value is 32767. The + 3 is due to the max size of a valid length VarInt.
Chat	≥ 1 ≤ (32767×4) + 3	See Chat	Encoded as a String with max length of 32767.
VarInt	≥ 1 ≤ 5	An integer between -2147483648 and 2147483647	Variable-length data encoding a two's complement signed 32-bit integer; more info in their section
VarLong	≥ 1 ≤ 10	An integer between -9223372036854775808 and 9223372036854775807	Variable-length data encoding a two's complement signed 64-bit integer; more info in their section
Chunk Section	Varies	A 16×16×16 chunk of blocks	See SMP Map Format
Entity Metadata	Varies	Miscellaneous information about an entity	See Entities#Entity Metadata Format
Slot	Varies	An item stack in an inventory or container	See Slot Data
NBT Tag	Varies	Depends on context	See NBT
Position	8	An integer/block position: x (-33554432 to 33554431), y (-2048 to 2047), z (-33554432 to 33554431)	x as a 26-bit integer, followed by y as a 12-bit integer, followed by z as a 26-bit integer (all signed, two's complement). See also the section below.
Angle	1	A rotation angle in steps of 1/256 of a full turn	Whether or not this is signed does not matter, since the resulting angles are the same.
UUID	16	A UUID	Encoded as an unsigned 128-bit integer (or two unsigned 64-bit integers: the most significant 64 bits and then the least significant 64 bits)
Optional X	0 or size of X	A field of type X, or nothing	Whether or not the field is present must be known from the context.
Array of X	count times size of X	Zero or more fields of type X	The count must be known from the context.
X Enum	size of X	A specific value from a given list	The list of possible values and how each is encoded as an X must be known from the context. An invalid value sent by either side will usually result in the client being disconnected with an error or even crashing.
Byte Array	Varies	Depends on context	This is just a sequence of zero or more bytes, its meaning should be explained somewhere else, e.g. in the packet description. The length must also be known from the context.

VarInt and VarLong

Variable-length format such that smaller numbers use fewer bytes. These are very similar to Protocol Buffer Varints: the 7 least significant bits are used to encode the value and the most significant bit indicates whether there's another byte after it for the next part of the number. The least significant group is written first, followed by each of the more significant groups; thus, VarInts are effectively little endian (however, groups are 7 bits, not 8).

VarInts are never longer than 5 bytes, and VarLongs are never longer than 10 bytes.

Pseudocode to read and write VarInts and VarLongs:

public static int readVarInt() {
    int numRead = 0;
    int result = 0;
    byte read;
    do {
        read = readByte();
        int value = (read & 0b01111111);
        result |= (value << (7 * numRead));

        numRead++;
        if (numRead > 5) {
            throw new RuntimeException("VarInt is too big");
        }
    } while ((read & 0b10000000) != 0);

    return result;
}

public static long readVarLong() {
    int numRead = 0;
    long result = 0;
    byte read;
    do {
        read = readByte();
        int value = (read & 0b01111111);
        result |= (value << (7 * numRead));

        numRead++;
        if (numRead > 10) {
            throw new RuntimeException("VarLong is too big");
        }
    } while ((read & 0b10000000) != 0);

    return result;
}

public static void writeVarInt(int value) {
    do {
        byte temp = (byte)(value & 0b01111111);
        // Note: >>> means that the sign bit is shifted with the rest of the number rather than being left alone
        value >>>= 7;
        if (value != 0) {
            temp |= 0b10000000;
        }
        writeByte(temp);
    } while (value != 0);
}

public static void writeVarLong(long value) {
    do {
        byte temp = (byte)(value & 0b01111111);
        // Note: >>> means that the sign bit is shifted with the rest of the number rather than being left alone
        value >>>= 7;
        if (value != 0) {
            temp |= 0b10000000;
        }
        writeByte(temp);
    } while (value != 0);
}

Note that Minecraft's VarInts are not encoded using Protocol Buffers; it's just similar. If you try to use Protocol Buffers Varints with Minecraft's VarInts, you'll get incorrect results in some cases. The major differences:

• Minecraft's VarInts are all signed, but do not use the ZigZag encoding. Protocol buffers have 3 types of Varints: uint32 (normal encoding, unsigned), sint32 (ZigZag encoding, signed), and int32 (normal encoding, signed). Minecraft's are the int32 variety. Because Minecraft uses the normal encoding instead of ZigZag encoding, negative values always use the maximum number of bytes.
• Minecraft's VarInts are never be longer than 5 bytes and its VarLongs will never be longer than 10 bytes, while Protocol Buffer Varints will always use 10 bytes when encoding negative numbers, even if it's an int32.

Sample VarInts:

Value	Hex
0	0x00
1	0x01
2	0x02
127	0x7f
128	0x80 0x01
255	0xff 0x01
2147483647	0xff 0xff 0xff 0xff 0x07
-1	0xff 0xff 0xff 0xff 0x0f
-2147483648	0x80 0x80 0x80 0x80 0x08

Sample VarLongs:

Value	Hex
0	0x00
1	0x01
2	0x02
127	0x7f
128	0x80 0x01
255	0xff 0x01
2147483647	0xff 0xff 0xff 0xff 0x07
9223372036854775807	0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x7f
-1	0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x01
-2147483648	0x80 0x80 0x80 0x80 0xf8 0xff 0xff 0xff 0xff 0x01
-9223372036854775808	0x80 0x80 0x80 0x80 0x80 0x80 0x80 0x80 0x80 0x01

Position

64-bit value split in to three parts

• x: 26 MSBs
• z: 26 LSBs
• y: 12 bits between them

Encoded as followed:

((x & 0x3FFFFFF) << 38) | ((y & 0xFFF) << 26) | (z & 0x3FFFFFF)

And decoded as:

val = read_unsigned_long();
x = val >> 38;
y = (val >> 26) & 0xFFF;
z = val << 38 >> 38;

Note: The details of bit shifting are rather language dependent; the above may work in Java but probably won't in other languages without some tweaking. In particular, you will usually receive positive numbers even if the actual coordinates are negative. This can be fixed by adding something like the following:

if x >= 2^25 { x -= 2^26 }
if y >= 2^11 { y -= 2^12 }
if z >= 2^25 { z -= 2^26 }

Fixed-point numbers

Some fields may be stored as fixed-point numbers, where a certain number of bits represents the signed integer part (number to the left of the decimal point) and the rest represents the fractional part (to the right). Floating points (float and double), in contrast, keep the number itself (mantissa) in one chunk, while the location of the decimal point (exponent) is stored beside it.

Essentially, while fixed-point numbers have lower range than floating points, their fractional precision is greater for higher values. This makes them ideal for representing global coordinates of an entity in Minecraft, as it's more important to store the integer part accurately than position them more precisely within a single block (or meter).

Coordinates are often represented as a 32-bit integer, where 5 of the least-significant bits are dedicated to the fractional part, and the rest store the integer part.

Java lacks support for fractional integers directly, but you can represent them as integers. To convert from a double to this integer representation, use the following formulas:

 abs_int = (int)double * 32;

And back again:

 double = (double)abs_int / 32;