Difference between revisions of "Classic Protocol Extension"

From wiki.vg
Jump to navigation Jump to search
(Put TextColors after BulkBlockUpdate extension for proper order)
(Document EntityProperty extension)
Line 1,452: Line 1,452:
 
|}
 
|}
 
''Example:'' Suppose the server sends a '''''SetTextColor''''' packet of color #123456 and color code 'G'. When the client receives a '''''Message''''' packet with the text ''&fFoo&GBar'', ''Foo'' is drawn using the color #FFFFFF and  ''Bar'' is drawn using the color #123456.
 
''Example:'' Suppose the server sends a '''''SetTextColor''''' packet of color #123456 and color code 'G'. When the client receives a '''''Message''''' packet with the text ''&fFoo&GBar'', ''Foo'' is drawn using the color #FFFFFF and  ''Bar'' is drawn using the color #123456.
 +
 +
===EntityProperty===
 +
:Allows servers to change the properties of entities, beyond changing their position and yaw/pitch.
 +
:'''Motivation''': Allow for greater customisation, while also allowing for extension to more properties in the future.
 +
:'''Client Behavior''': Client must be able to receive '''''SetEntityProperty''''' packets after the '''''[[Classic_Protocol#Server_.E2.86.92_Client_packets|LevelFinalize]]''''' packet for the current level has been received from the server.
 +
:'''Server Behavior''': Server may send '''''SetEntityProperty''''' packets to the client after the '''''[[Classic_Protocol#Server_.E2.86.92_Client_packets|LevelFinalize]]''''' packet for the current level has been sent to the client.
 +
<h4>SetEntityProperty packet</h4>
 +
:''Server to Client''
 +
:{| class="wikitable"
 +
|- class="row0"
 +
! class="col0" | Packet ID
 +
! class="col1" | Field Name
 +
! class="col2" | Field Type
 +
! class="col3" | Example
 +
! class="col4" | Notes
 +
|- class="row1"
 +
| class="col0 centeralign" rowspan="3" | 0x26
 +
(42)
 +
| class="col1 centeralign" | EntityID
 +
| class="col2 centeralign" | byte
 +
| class="col3 centeralign" | <code>0</code>
 +
| class="col4 centeralign" | Between 0 and 127
 +
|- class="row2"
 +
| class="col1 centeralign" | Property type
 +
| class="col2 centeralign" | byte
 +
| class="col3 centeralign" | <code>0</code>
 +
| class="col4" | Enumeration of properties that can be changed
 +
*0 = Model X rotation in degrees
 +
*1 = Model Y (yaw) rotation in degrees
 +
*2 = Model Z rotation in degrees
 +
|- class="row3"
 +
| class="col1 centeralign" | Property value
 +
| class="col2 centeralign" | int
 +
| class="col3 centeralign" | 45
 +
| class="col4 centeralign" | New value for the given property.
 +
|- class="row12"
 +
! class="col0" | Total Size:
 +
| class="col1 rightalign" colspan="4" | 1282 bytes
 +
|}
  
 
===ExtEntityPositions===
 
===ExtEntityPositions===

Revision as of 11:09, 21 June 2017

Classic Protocol Extension (CPE) is a project to augment the Minecraft Classic network protocol with new and improved functionality.

Extensions are designed to keep extended clients and servers compatible with standard clients and servers. Standard clients and extended clients can play on the same server side-by-side. Extensions are designed to be modular: custom clients and servers can selectively implement any subset of extensions, and only mutually-supported extensions will be used.

This specification has not yet been finalized, and is subject to change.

Last revision: 9 May 2016. Keep an eye on the history subpage for a chronology of changes.

Do you have an idea for an extension? Please post it on the Proposals subpage.

Contents

Support

See support subpage for a detailed table.

Custom servers that already support CPE: FemtoCraft, D3, LegendCraft, GemsCraft, Hypercube, MCSong

Custom servers that plan to add support: 800Craft, cloudBox, fCraft, GGS

Custom clients that already support CPE: ClassiCube Client, ClassicalSharp

Custom clients that plan to add support: Charged Miners, GemsClient

Negotiation

When CPE-capable client connects to a CPE-capable server, a brief negotiation needs to happen before any extensions are used. Client and server declare their capabilities and determine which extensions are mutually supported. All CPE-capable software is required to support this.

CPE Negotiation.png

Client behavior: Extended clients must use magic number of 0x42 (66 decimal) for the padding byte of the PlayerIdentification packet. It must then await a response. If server responds with any packet other than ExtInfo, client must assume that the server does NOT support CPE. If the server responds with an ExtInfo packet, client must parse it and any ExtEntry packets that follow. Client must then compare its locally-supported set of extensions with the list of extensions provided by the server, and find an intersection of these sets. These are the mutually-supported extensions. Client must now send ExtInfo packet of its own, followed by a list of zero or more client-supported extensions. After sending the last of ExtEntry packets, client should activate all mutually-supported extensions and resume normal login procedure.

Server behavior: When a client connects, server must read the PlayerIdentification packet and check its padding byte. If this byte is set to 0x42 (66 decimal), assume that the client supports CPE. If this byte is set to any other value, assume that the client does NOT support CPE.

Server must immediately reply to CPE clients with an ExtInfo packet, followed by zero or more ExtEntry packets, and await a response from the client. Client will respond with one ExtInfo and zero or more ExtEntry packets. Server must then compare its locally-supported set of extensions with the list of extensions provided by the client, and find an intersection of these sets. These are the mutually-supported extensions. After receiving the last of ExtEntry packets, server should activate all mutually-supported extensions and resume normal login procedure.

Note 1: All standard/non-extended clients use 0x00 for the padding byte. All standard servers ignore this padding byte. Therefore, this negotiation process does not affect compatibility with standard software.

Note 2: Do not make any assumptions about supported functionality based on the AppName field of ExtInfo packet. It's for logging purposes only.

Note 3: Do not declare support for an extension until it is FULLY implemented, except for debugging.

ExtInfo Packet

Packet ID Field Name Field Type Example Notes
0x10

(16)

AppName string MyServer Client or server software name
ExtensionCount short 1 Between 0 and 32767
Total Size: 67 bytes

ExtEntry Packet

Packet ID Field Name Field Type Example Notes
0x11

(17)

ExtName string MyExtension Name of a supported extension
Version int 1 Only extensions with identical version numbers should be considered compatible.
Total Size: 69 bytes

Extensions

Note: The section heading is the name of the extension. Packet names are not same as extension names. For example, the first extension listed here is named "ClickDistance" and not "SetClickDistance".

Do you have an idea for an extension? Please post it on the Proposals subpage.

ClickDistance

Used to extend or restrict the distance at which client may click blocks, controlled by the server. Click range is given in player-space units (32 units per block). In Minecraft Classic, the default range is 160.
Motivation: This extension allows trusted players to have a wider or virtually-unlimited reach. It may simplify operation of certain bots. Restricting the reach may allow new games/mini-games.
Client Behavior: Upon receiving a SetClickDistance packet, client should immediately apply the change. Distance should persist between worlds/maps.
Server Behavior: Server should send SetClickDistance packet when the server connects, or whenever their permitted click distance changes. Server should allow for some margin-of-error (+/- 1 block) when enforcing click distance restrictions.

SetClickDistance packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x12

(18)

Distance short 160
Total Size: 3 bytes

CustomBlocks

Used to add support for custom block types. Custom block IDs start at 50 (0x32). New block types will be added in batches, a few at a time. Both client and server declare which batch they support, and use the lower of the two versions. Claiming to support a batch implies fully implementing all the batches that came before it. If either server or client do not support this extension, only the standard 50 block types should be used.
Motivation: Adding new visually distinct blocks, to enhance Classic players' experience.
Client behavior: Client must expect a CustomBlockSupportLevel packet from a compatible server immediately after sending the last ExtEntry packet. It should then reply with its own CustomBlockSupportLevel packet, containing its actual support level. Client must then use the lower of the two levels in operation. Client must not send any block types that are not defined by the current support level. Client should expect ServerIdentification packet only AFTER sending its CustomBlockSupportLevel packet.
Server behavior: Server must send a CustomBlockSupportLevel packet to compatible clients immediately after receiving the last ExtEntry packet from the client. It should then wait to receive a CustomBlockSupportLevel packet from the client before sending the ServerIdentification packet. Server must then use the lower of the two levels in operation. If this level is lower than the server's, it has to filter data sent to the client, to make sure that the client never receives any block types that it does not support. Each level will define what substitutions to use.

CustomBlockSupportLevel packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x13

(19)

SupportLevel byte 1
Total Size: 2

Blocks in support level 1

Client must be able to receive/render all 16 custom blocks to claim support. Server must be able to receive/store all 16 custom blocks to claim support.
CPE CustomBlocks Level1.png
Block name Block ID Fallback name Fallback ID
CobblestoneSlab 0x32 (50) Slab 0x2C (44)
Rope 0x33 (51) BrownMushroom 0x27 (39)
Sandstone 0x34 (52) Sand 0x0C (12)
Snow 0x35 (53) Air 0x00 (0)
Fire 0x36 (54) Lava 0x0A (10)
LightPinkWool 0x37 (55) Pink 0x21 (33)
ForestGreenWool 0x38 (56) Green 0x19 (25)
BrownWool 0x39 (57) Dirt 0x03 (3)
DeepBlue 0x3A (58) Blue 0x1d (29)
Turquoise 0x3B (59) Cyan 0x1c (28)
Ice 0x3C (60) Glass 0x14 (20)
CeramicTile 0x3D (61) Iron 0x2a (42)
Magma 0x3E (62) Obsidian 0x31 (49)
Pillar 0x3F (63) White 0x24 (36)
Crate 0x40 (64) WoodenPlanks 0x05 (5)
StoneBrick 0x41 (65) Stone 0x01 (1)
Block IDs for future support levels are guaranteed to be assigned monotonically, incrementally, and permanently.

HeldBlock

Provides a way for the client to notify the server about the blocktype that it is currently holding, and for the server to change the currently-held block type.
Motivation: This allows server to know which block player is holding, for example for drawing commands, without needing to wait for the player's click. It also allows for features like /Spectate to show what block a spectated player is holding.
Client behavior: When this extension is mutually supported, client should use the PlayerID field of the PositionAndOrientation packet (currently unused) to indicate which blocktype the client is currently holding. It should be ready to accept HoldThis packets to change the block that the player is holding. If 0 is given for BlockToHold, client should hide the hand/block from the screen, and should not be able to click blocks, until they switch to a different blocktype. If an unrecognized blocktype is given, no action is needed.
Server behavior: The server can use HoldThis packet to force the client to hold the desired block type. It should be done sparingly.

HoldThis packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x14

(20)

BlockToHold byte 49 Standard block type
PreventChange byte 0 0 = Allow player to change blocktype

1 = Prevent player from changing blocktype

Total Size: 3 bytes

EmoteFix

This extension indicates that the client can render emotes (ASCII control characters) in chat properly, without padding or suffixes that are required for vanilla client. This extension does not define any new packets.
Motivation: To improve appearance of emotes in chat.
Client behavior: Client should not emulate vanilla client's quirks.
Server behavior: Server should not pad or suffix emotes in chat.

TextHotKey

This extension allows the server to define "hotkeys" for certain commands.
Motivation: To speed up and simplify access to commonly-used commands and command macros by providing server-defined client-side hotkeys.
Client behavior: Client should not try to persist previously-defined hotkeys between sessions. When a defined hotkey is activated by the user, client should open up a text prompt and type in contents of the Action field. A newline character (\n) in the Action field indicates that whatever is currently typed-in should be sent to the server. If Action does not end with a newline, text prompt should be left open, for the user to complete. Client may provide a way for the user to see a list of currently-defined hotkeys, and a way to notify the user when a hotkey was activated.
Server behavior: The server should send a definition of each hotkey (SetTextHotKey packet) once per connection.

SetTextHotKey packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x15

(21)

Label string Copy Readable name of the hotkey
Action string /Copy Text to type in
KeyCode int 113 LWJGL keycode of the key
KeyMods byte 0 Key modifier flags, may be combined:
  • 0 = None
  • 1 = Ctrl
  • 2 = Shift
  • 4 = Alt
Total Size: 134 bytes

ExtPlayerList

Motivation: Provides more flexibility in naming of players and loading of skins, autocompletion, and player tab-list display. Separates tracking of in-game entities (spawned player models) and names on the player list. ExtAddPlayerName/ExtRemovePlayerName packets take over managing the player names list (tab-list), and ExtAddEntity2/DespawnPlayer packets are used only to manage in-game entities.

Version 1 (Deprecated since 28 August 2014)

This version of the extension has been deprecated and replaced with version 2. See old extensions subpage.

Version 2

Version 2 of this extension replaces ExtAddEntity packet with ExtAddEntity2, allows using full URLs for SkinName, and clarifies interaction with ChangeModel extension.

Client Behavior
When ExtAddPlayerName packet is received for an unrecognized NameID, a new name must be added to the player-name list. When receiving ExtAddPlayerName packet for an already-listed NameID, client must update its ListName, GroupName, and GroupRank. Player-name list must persist when client changes worlds/maps.
When an ExtAddEntity2 packet is received, it must be treated as the SpawnPlayer packet. A player model must be spawned in-game at the given location, with InGameName text drawn above it. Skin should be loaded using the given SkinName for a player name. When client receives ExtAddEntity2 packet for an already-spawned player, a duplicate entity must not be spawned and existing entity's position must not be changed. Instead their InGameName and SkinName must be updated. If a negative EntityID is given for ExtAddEntity2, client must update player's own spawn point, InGameName, and SkinName. The client must ignore regular SpawnPlayer packets, if any are received.
Player entity's skin should be loaded using the given SkinName. If SkinName appears to be a player name, skin should be downloaded from the default skin server. If SkinName appears to be a full URL to a PNG image (starts with http:// or https:// and ends with .png) then skin should be downloaded from that URL. If image is correctly sized/proportioned to use as a skin for the current model, it should be used. If a blank or unrecognized value is given for SkinName, or if given image could not be downloaded or used, then the default skin should be used.
Names on the player-name list should be grouped by GroupName in the player-name list. Names within a GroupName should be sorted by GroupRank (in ascending order). Names with the same GroupName and GroupRank should be sorted alphabetically by ListName. Color codes may be either drawn or stripped from ListName, GroupName, and InGameName.
When a standard DespawnPlayer packet is received for a recognized EntityID, player model must be removed from a world. When ExtRemovePlayerName packet is received for a recognized NameID, their name must be removed from player-name list. Packets with out-of-range or unrecognized NameIDs must be ignored.
In-game entities must never be affected by ExtAddPlayerName or ExtRemovePlayerName packets. Player name list must never be affected by ExtAddEntity2 or DespawnPlayer packets.
Server Behavior
Event Packet to send
Player connects to server ExtAddPlayerName
Player enters map ExtAddEntity2
Player leaves map DespawnPlayer
Player disconnects from server ExtRemovePlayerName
Unique NameID between 0 and 255 should be assigned to every online player. When a new player connects to the server, ExtAddPlayerName must be sent. GroupName and GroupRank can be used in any way, for example to group players by map/world or rank/class/faction. Server must use ExtAddEntity2 in place of standard SpawnPlayer packet. Server should re-send ExtAddPlayerName packet, using the identical NameID, when player's ListName, GroupName, or GroupRank change. Server must reliably send an ExtRemovePlayerName packet when the player disconnects. Color codes are permitted in ListName, GroupName, and InGameName.
ExtAddPlayerName Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x16

(22)

NameID short 5 Between 0 and 255
PlayerName string Notch Player name used for autocompletion.

May be left empty (to exclude from autocompletion).

ListName string &c[Op]Notch Name displayed in the in-game list.
GroupName string Staff May be left blank.
GroupRank byte 0 Rank of a player within the group.

Lower-number ranks are listed before higher-number ranks.

Total Size: 196 bytes
ExtAddEntity2 Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x21

(33)

EntityID byte 5 Between 0 and 127
InGameName string &cNotch Player name to be shown in-game, hovering above player model.
SkinName string Notch Player name whose skin should be used by the client.
SpawnX short 1 X coordinate (32 units per block) of entity's spawn location.
SpawnY short 2 Y coordinate (32 units per block) of entity's spawn location.
SpawnZ short 3 Z coordinate (32 units per block) of entity's spawn location.
SpawnYaw byte 4 Orientation (left-right) at the entity's spawn location.
SpawnPitch byte 5 Orientation (up-down) at the entity's spawn location.
Total Size: 138 bytes
ExtRemovePlayerName Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x18

(24)

NameID short 5 Between 0 and 255

Matches NameID of the ExtAddPlayerName packet

Total Size: 3 bytes

EnvColors

This extension allows server to alter some of the colors used by the client in environment rendering.
Motivation: To allow the server to give worlds/maps a unique feel: time-of-day, weather/climate, lighting effect, etc.
Client behavior: Client must check for EnvSetColor packets right before LevelFinalize packet, and apply these changes before the map is displayed. Client must be able to read this packet at other times, but it is not required to then apply the changes immediately. If an unrecognized or unsupported Variable field is given, no action is needed. If an out-of-range color is given by the server (i.e. if any of Red, Green, or Blue is less than 0 or greater than 255), then the specified Variable should be reset to its default value.
Server behavior: Server should normally only use EnvSetColor packets right before the LevelFinalize packet. To reset a variable to its default value, the server should send a packet with value -1 for Red, Green, and Blue.

EnvSetColor Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x19

(25)

Variable byte 1 Enumeration of environmental variables
  • 0 = sky color
  • 1 = cloud color
  • 2 = fog color
  • 3 = ambient light (blocks in shadow) color
  • 4 = diffuse light (sunlight) color
Red short 25 Between 0 and 255
Green short 128 Between 0 and 255
Blue short 0 Between 0 and 255
Total Size: 8 bytes

SelectionCuboid

Motivation: Allows the server to highlight parts of a world. Applications include zoning, previewing draw commands, previewing undo commands.
Coordinates: {StartX,StartY,StartZ} are coordinates of the block inside the selection that is closest to the map origin. {EndX,EndY,EndZ} are coordinates of the block inside the selection that is furthest from the map origin. Therefore, the resulting selection has dimensions {EndX-StartX+1, EndY-StartY+1, EndZ-StartZ+1).
Client behavior: Client should be ready to receive MakeSelection packets any time after LevelFinalize packet. Upon receiving the packet, a translucent cuboid should appear in the world. The cuboid may feature a plain or "grid" texture. Selections that extend outside the map may be either ignored or clipped to fit. Selections with inconsistent coordinates (e.g. where StartX<EndX) may either be ignored or re-ordered. Out-of-range values for Red, Green, Blue, and Opacity should be clipped to fit the valid range. Supporting Opacity is optional: the client may opt to provide fixed opacity instead. When map changes (i.e. when LevelInitialize packet is received), all existing selections should be removed. RemoveSelection packets that refer to non-existent SelectionIDs should be ignored.
Server behavior: All given coordinates must be contained within the map. End coordinates should be higher or equal than start coordinates.

MakeSelection packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x1A

(26)

SelectionID byte 0 Numeric ID of the selection. Between 0 and 127.
Label string SomeZone Text label associated with the selection
StartX short 1 X coordinate of the starting point
StartY short 2 Y coordinate of the starting point
StartZ short 3 Z coordinate of the starting point
EndX short 5 X coordinate of the ending point
EndY short 6 Y coordinate of the ending point
EndZ short 7 Z coordinate of the ending point
Red short 255 Between 0 and 255.
Green short 34 Between 0 and 255.
Blue short 128 Between 0 and 255.
Opacity short 255 0 = fully transparent

255 = fully opaque

Total Size: 86 bytes

RemoveSelection packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x1B

(27)

SelectionID byte 0
Total Size: 2 bytes

BlockPermissions

This extension allows the server to instruct the player that certain block types are allowed/disallowed to be placed or deleted.
Motivation: To prevent players from inadvertently placing or removing prohibited block types (e.g. water, lava, grass, admincrete), before it even reaches the server.
Client behavior: Client should prevent placement of prohibited block types (by graying out or hiding blocks in block-selection screen, or any other effective means). Client should prevent player from deleting prohibited block types. Client must be ready to receive SetBlockPermission packet after map load (LevelFinalize packet). Permission changes should take effect as soon as packet is received. Admincrete (solid block) permissions set by SetBlockPermission must always override permission set by ServerIdentification and UpdateUserType packets. If BlockType is set to 0, given permissions should affect ALL block types at once, overriding permissions set by any earlier packets. Permissions must persist between map changes. Client may optionally warn the player attempting to place/delete prohibited blocks via sound effect, visual effect, chat message, etc.
Server behavior: Server may send SetBlockPermission packets any time after map load (LevelFinalize packet). Any valid block ID may be specified for BlockType, including custom blocks (if CustomBlocks extension is mutually supported). BlockType may be set to 0 to set permissions for ALL block types at once. Server must not assume that client is compliant/obedient, and server must still verify each SetBlock packet coming from the client. What to do with non-complying clients (kick or warn) is up to you.

SetBlockPermission packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x1C

(28)

BlockType byte 8 Block's numeric ID (anything between 1 and max defined block).
AllowPlacement byte 0 0 = Prohibited

1 or any other value = Allowed

AllowDeletion byte 0 0 = Prohibited

1 or any other value = Allowed

Total Size: 4 bytes

ChangeModel

Allows changing appearance of player models in supporting clients.
Client Behavior
The client will receive an EntityID and a string value containing the model name. The client will then change the model of the player whose ID is the same as the received AddEntity, ExtAddEntity, or ExtAddEntity2 packet. The model name will be parsed by the model manager and the model changed in game. If the model does not exists in the model manager or is 0-length, change the model back to humanoid. Alternatively, you can send the client an int converted to a string which represents a valid Block ID. An EntityID of -1 (255 unsigned) indicates the player's own model. If model is set to humanoid, player-specific skin should be used. For all other models, default model-specific textures should be used.
Server Behavior
The server may send an EntityID and then a ModelName to the client for a desired entity. The model name must be chosen from the list below. To reset the model to default, server should set ModelName to humanoid or to an empty string.
Interaction with ExtPlayerList
If an ExtAddEntity2 packet is received for a non-humanoid entity and SkinName specifies a full URL, that image should be downloaded and used as a texture for the currently model. Receiving another ExtAddEntity2 packet should either update this texture (if SkinName is a full URL) or reset it back to default (if SkinName is anything else). Receiving another ChangeModel packet with a non-humanoid ModelName should reset texture back to model-specific default.

ChangeModel Packet

Packet ID Field Name Field Type Example Notes
0x1D

(29)

EntityID byte 5 Between 0 and 127.
ModelName string spider The name of the model to be used OR a valid Block ID as a string.
Total Size: 66 bytes

Available models

Client can render any or none of the below, but it is down to the client to handle what can and cannot be rendered if the packet is received
Model Name Model String
Chicken chicken
Block Model A valid block ID as a string
Creeper creeper
Crocodile croc
Humanoid humanoid (or an invalid model name)
Pig pig
Printer printer
Sheep sheep
Skeleton Archer skeleton
Spider spider
Zombie zombie

EnvMapAppearance

This extension allows the server to specify custom terrain textures, and tweak appearance of map edges.
Motivation: To provide more ways to customize map appearance, including functionality that's currently provided by World of Minecraft's scheme.

Version 1 (Deprecated since 9 May 2016)

This version of the extension has been deprecated and replaced with version 2. See old extensions subpage.

Version 2

This extension allows the server to specify custom texture packs, and tweak appearance of map edges.
Client behavior: Client must be able to receive EnvSetMapAppearance v2 packets any time during level load (after the first LevelDataChunk packet is received and until the LevelFinalize packet is received). If the TexturePackURL field is blank or if the given file could not be loaded for any reason, then the texture pack should be reset to the client's default. If an unsupported block ID is given for SideBlock or EdgeBlock, it should be ignored. The given SideLevel value should be adjusted to fit between 0 and MapDepth, if necessary. Client should keep using these appearance parameters for future maps, unless specified otherwise by the server.
Server behavior: Server may send EnvSetMapAppearance v2 packets after the last LevelDataChunk packet is sent for a level. Server should not use any custom block IDs unless the client declared the appropriate CustomBlocks support level. To reset the texture pack to the client's default one, server should send an EnvSetMapAppearance v2 packet with empty string for TexturePackURL. To reset other fields, server should simply use the default values (listed below).
Block type restrictions: Only solid blocks are allowed to be used for SideBlock and EdgeBlock. Sprites (Sapling, Dandelion, Rose, BrownMushroom, RedMushroom, Rope, Fire) partial-height blocks (Slab, CobblestoneSlab, Snow), and transparent blocks (Air, Leaves, Glass) cannot be used for those fields.
EnvSetMapAppearance v2 packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x1E

(30)

TexturePackURL string http://example.com/mypack.zip Texture pack's full URL.

Must be a HTTP/HTTPS URL, in .zip format, and served with application/zip mime type. If a .png is instead served, this is assumed to represent a terrain.png image.

SideBlock byte 7 Block ID. Default value is 7 (Admincrete).
EdgeBlock byte 8 Block ID. Default value is 8 (Water).
SideLevel short 31 Elevation from bottom of the map, in blocks.

Value should be between 0 and MapDepth. Default value is MapDepth/2.

CloudLevel short 31 Elevation from bottom of the map, in blocks.

Value should be between -32768 and 32767. Default value is MapDepth + 2.

MaximumViewDistance short 16 The maximum view distance the client is allowed to see, in blocks.

Default is 0. (Client has no limit on view distance.)

Total Size: 73 bytes
Texture pack .zip format
Note: It is up to clients which files (except for terrain.png) they support in a texture pack. These clients are still considered to be compliant with the specification.
Note: Texture packs may also contain other files not listed below. If clients recognise these other files, then they may perform whatever is desired with them.
Note: If a texture pack does not contain a certain texture, clients should continue to use the existing texture from the previous texture pack.
File name Details
terrain.png Texture atlas that contains the textures that are applied to blocks.

Note: Clients must support this texture to be considered compliant with the specification.

animations.png Texture atlas that contains the textures used for animations.
animations.txt File that specifies how the textures in animations.png should be applied to the terrain.png texture atlas.
char.png Default skin for humanoid models.
clouds.png Texture applied to clouds rendered by the client.
The following may be utilised by clients if EnvWeatherType is mutually supported:
rain.png Texture applied to rain rendered by the client.
snow.png Texture applied to snow rendered by the client.
The following may be utilised by clients if ChangeModel is mutually supported:

Note: The default texture for humanoid models is specified by char.png. Block models use textures from terrain.png.

x.png Default texture applied to a model for model string x.

For example, the Crocodile model has the model string croc. The default texture that would be applied is specified by croc.png.

animations.txt format
Each line is in the format: <TileX> <TileY> <FrameX> <FrameY> <Frame size> <Frames count> <Tick delay>
- TileX and TileY indicate the coordinates of the tile in terrain.png that will be replaced by the animation frames. These range from 0 to 15. (inclusive of 15)
- FrameX and FrameY indicates the pixel coordinates of the first animation frame in animations.png. The top left pixel coordinate is (0, 0)
- Frame size indicates the size in pixels of an animation frame.
- Frames count indicates the number of used frames. The first frame is located at (FrameX, FrameY), second frame at (FrameX + FrameSize, FrameY) and so forth.
- Tick delay is the number of ticks a frame doesn't change. For instance, a value of 0 means that the frame would be changed every tick, while a value of 2 would mean 'replace with frame 1, don't change frame, don't change frame, replace with frame 2'.

EnvWeatherType

This extension allows the server to trigger special weather conditions (like rain and snow) on demand.
Motivation: To allow the server to give worlds/maps a unique feel with weather effects, e.g. for adventure maps.
Client behavior: Client must be able to receive EnvWeather packets at any time after the first LevelDataChunk packet is received, and apply these changes immediately. If an unrecognized or unsupported WeatherType field is given, no action is needed.
Server behavior: Server may send EnvSetColor packets to connected clients at any time after the first LevelDataChunk packet is sent.

EnvSetWeatherType Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x1F

(31)

WeatherType byte 1 Enumeration of weather types
  • 0 = sunny
  • 1 = raining
  • 2 = snowing
Total Size: 2 bytes

HackControl

This extension allows the server to control cheats/hacks in the client.
Motivation: To allow fine-grained control over cheats/hacks on multi-world servers.
Client behavior: Client must be able to receive HackControl packets at any time after the first LevelDataChunk packet is received, and apply these changes immediately. Unrecognized or unsupported values for any field should be ignored. Clients may approximate JumpHeight by rounding down to the nearest half-block (i.e. nearest multiple of 16), if needed. If a negative value is given for JumpHeight, client should reset jump height to its default setting (around 40 in vanilla Minecraft).
Server behavior: Server may send HackControl packets to connected clients at any time after the first LevelDataChunk packet is sent.

HackControl Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x20

(32)

Flying byte 0
  • 0 = Prevent player from flying
  • 1 = Allow flying
NoClip byte 0
  • 0 = Prevent player from no-clipping (passing through solid blocks)
  • 1 = Allow no-clipping
Speeding byte 0
  • 0 = Only allow normal walking speed.
  • 1 = Allow moving at any speeds.
SpawnControl byte 1
  • 0 = Prevent player from pressing [R] to respawn, or using [Enter] to change spawn.
  • 1 = Allow player to respawn / change spawn.
ThirdPersonView byte 1
  • 0 = Disallow third-person view (only first-person view allowed).
  • 1 = Allow third-person view.
JumpHeight short 40 Maximum height, in terms of player movement units (1/32nds of a block), to which the player is allowed to jump.

Negative value (e.g. -1) means that the client should use its default jump height.

Total Size: 8 bytes

MessageTypes

Examples of all possible MessageTypes.
This extension adds new ways of presenting messages in the client.
Motivation: To enhance the display of announcements and status information, and to reduce chat clutter.
Client behavior: When this extension is mutually supported, the PlayerID field of the standard server-to-client Message packet should be treated as a MessageType code. Unrecognized or unsupported codes may be ignored (in which case the message should be presented as a regular chat message). When connected to non-supporting servers, this field should be ignored.
Server behavior: Server may use the PlayerID field of the Message packet to set a MessageType. For non-supporting clients, this field should always be set to 0.
MessageType Meaning Suggested Implementation
0 Chat Normal message, shown in the chat area.
1 Status1 Shown persistently in the top-right corner of the screen, in regular font.
2 Status2 Shown persistently just below Status1
3 Status3 Shown persistently just below Status2
11 BottomRight1 Shown persistently in the bottom-right corner of the screen, in regular font.
12 BottomRight2 Shown persistently just above BottomRight1
13 BottomRight3 Shown persistently just above BottomRight2
100 Announcement Pops up in larger font near the top-center of the screen. Fades out after a few seconds.
This extension does not define any new packets.

PlayerClick

This extension lets the server receive details of every mouse click a player makes, including targeting information.
Motivation: To allow for the creation of more interactive maps: interactive buttons, cannons, ability to "tag" or "shoot" other players, ability to drag-to-draw at a distance, etc.
Client Behavior: When this extension is mutually supported, a PlayerClicked packet should be sent to the server, as soon as reasonably possible, every time the user presses or releases a mouse button. Mouse interactions that happen while player is interacting with chat, with GUI menus, or with any other application must NOT be sent. A matching "released" event must be sent for every "pressed" event.
High resolution up-to-date Yaw and Pitch for the player should be transmitted with every packet. If player is currently targeting another entity/player TargetEntityID fields should be set. If player is currently targeting a block (within permitted ClickDistance) TargetBlockX, TargetBlockY, TargetBlockZ, and TargetBlockFace should be set. An out-of-range value should be used for these fields when they are not in use. These packets should not be sent during level transitions (after receiving LevelInitialize and until receiving LevelFinalize packets).
Server Behavior: Server must be ready to accept any number of PlayerClicked packets at any time after level sending has completed. What to do with this information is entirely up to the server.

PlayerClicked packet

Client to Server
Packet ID Field Name Field Type Example Notes
0x22

(34)

Button byte 0 0 = Left click, 1 = Right Click, 2 = Middle click
Action byte 0 0 = Pressed, 1 = Released
Yaw short 0 Yaw (heading) of the player.

Same function as Yaw field of PositionAndOrientation packet, but with more precision.

Pitch short 0 Pitch (head angle) of the player.

Same function as Pitch field of PositionAndOrientation packet, but with more precision.

TargetEntityID byte 0 ID of an entity currently targeted by the player, between 0 and 127.

Any out-of-range value means "no entity is targeted."

TargetBlockX short 64 X coordinate of a targeted block, between 0 and 2048.

Any out-of-range value for any of the coordinates means "no block is targeted."

TargetBlockY short 64 Y coordinate of a targeted block, between 0 and 2048.
TargetBlockZ short 64 Z coordinate of a targeted block, between 0 and 2048.
TargetBlockFace byte 1 Index of the block face that the player is targeting. Block faces are numbered as follows:

0. Away from X-origin

1. Towards X-origin

2. Away from Y-origin (up)

3. Towards Y-origin (down)

4. Away from Z-origin

5. Towards Z-origin

Any out-of-range value for TargetBlockFace mean "no block is targeted."

Total Size: 15 bytes

LongerMessages

This extension allows clients to accept messages longer than 64 characters, and send them to the server in parts.
Motivation: To allow players to write longer messages!
Client Behavior: When a regular-length message is sent, a single Message packet is sent, with the unused PlayerID (aka MessageType) byte set to 0. When an extra-long message is sent, multiple Message packets are sent. All packets except the last one should have the unused byte set to 1, meaning "this message continues in the next Message packet".
Server Behavior: Server should check the unused PlayerID (aka MessageType) byte of every incoming Message packet. If the value is non-zero, it should treat it as a partial message. Partial messages should be stored and prepended to the next message received from this player, until a message with a 0 byte is received.
No new packets are defined, but treatment of Message packet is altered.

FullCP437

This extension allows players to send and receive chat with all characters in code page 437, rather than just the 0 to 127 characters.
Motivation: To allow players to use more characters for different purposes.
Client Behavior: When a message packet is received, clients must treat all characters in that message as unsigned bytes that represent indices into code page 437. Clients may optionally provide a way of directly entering code page 437 characters into chat.
Server Behavior: Servers must support being able to send and receive chat message packets which include unsigned byte values ranging from 0 to 255. Servers must also provide a fallback mechanism for converting unsigned bytes in the 128-255 range into the 0 to 127 range for clients that do not support this extension. (e.g converting all unsigned bytes in the 128 to 255 range to a '?' symbol)

Note: Ideally, servers should also provide some method of escaping that allows users to enter a token that is then converted into a code page 437 index, but that is not required to claim support for this extension.

As an example of an escaping mechanism, when "{infinity}" is entered by the player, it becomes a single unsigned byte with a value of '236' after being processed by the server. When the chat message packet is later received by the client, it renders the unsigned byte with the value of '236' as ∞.

BlockDefinitions

This extension allows servers to define new block types with custom IDs and appearance, as well as the ability to redefine the properties of standard block types.
Motivation: To allow defining block types without client modifications. To make full use of custom textures.
Client Behavior: This extension depends on EnvMapAppearance extension, and must only be enabled if BOTH extensions are mutually supported. Client should be able receive any number of DefineBlock and RemoveBlockDefinition packets during the level loading process (after receiving LevelInitialize and until receiving LevelFinalize packets). However, dependent on client, this can be sent after level loading (Some clients might just find it more extensible than others). Client must keep track of all defined blocks between level changes or until they are individually removed with RemoveBlockDefinition.
Client must be able to accept and render blocks as specified in DefineBlock packets. Clients must accept any valid definitions with BlockID between 1 and 254, inclusive. If a new definition is accepted for an already-defined BlockID, the old definition should be replaced. If RemoveBlockDefinition is received for a non-defined BlockID, it should be ignored.
Texturing: New textures are defined by altering terrain.png and specifying it with EnvSetMapAppearance packet. DefineBlock fields TopTextureID, SideTextureID, and BottomTextureID refer to a tile number within terrain.png. Tiles are numbered 0 (top-left corner) through 255 (bottom-right corner), increasing left-to-right within each row. Refer to this image for a list of standard tiles, and a graphical list of tile indices.
Server Behavior: Server may send any number of DefineBlock packets when client expects it. Server should only use IDs of currently-defined blocks in block data sent in LevelDataChunk packets, SetBlock packets, or any other packets that expect block IDs.
Compatibility: For non-supporting clients, the server must convert custom block ids into fallback block ids (e.g. 'lamp' fallbacks to lava) that lie within the client's set of supported blocks. (TODO: Define how the client should store map files with block definitions. Maybe integrate this with ClassicWorld definition?) 0 is not allowed to be redefined, nor is 255, as 255 is typically used by servers to indicate 'outside map bounds'. Note that sending a RemoveBlockDefinition packet for a standard tile id is not defined, and may lead to undesired consequences.
DefineBlock Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x23

(35)

BlockID byte 128 Between 1 and 254 (unsigned).
Name String Cactus Short, unique, player-friendly name for the block.
Solidity byte 1 Specified collision mode for this block type.

Blocks may be walk-through (0), swim-through (1), or solid (2).

  • Walk-through blocks do not collide with the player, and do not interfere with jumping. Players fall through these blocks.
  • Swim-through blocks allow the player to descend or ascend slowly (at WalkSpeed), as if they were swimming.
  • Solid blocks collide with the player. Players may walk on these.
MovementSpeed byte 1 Player movement speed modifier, defined relative to regular walk speed. Ratio to normal speed is computed with this formula:

y = 2(x-128)/64 Thus a value of 0 translates to 0.25 ratio (25% speed), 128 to 1.00 ratio (100% speed), and 255 to 3.96 (396% speed).

  • If Solidity is set to 0 or 1, speed is modified while player is inside (i.e. colliding with) the block.
  • If Solidity is set to 2, speed is modified while player is standing on the block.

If player is affected by several tiles, the lowest of all modifiers is used.

TopTextureID byte 1 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs.

SideTextureID byte 2 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs. This is also the texture ID used for drawing sprite blocks (i.e. when Shape is 0).

BottomTextureID byte 3 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs.

TransmitsLight byte 0 Whether this block allows the sunlight to go through, for level-lighting purposes.
WalkSound byte 0 ID of a sound that client may play when player "steps" on, "walks" through, or "swims" through this tile.

0 = no sound, 1 = wood, 2 = gravel, 3 = grass, 4 = stone, 5 = metal, 6 = glass, 7 = wool, 8 = sand, 9 = snow.

FullBright byte 0 Whether or not the block/liquid is affected by shadows (such as lava).
  • 0 = Affected (darkened when in shadow)
  • 1 = Not affected (always bright).
Shape byte 0 Shape of the block model:
  • Sprite = 0,
  • Cube with height = 1-16

(e.g. slab would have a shape of '8', snow would have '2', dirt would have '16')

BlockDraw byte 0 Can be:
  • 0 = fully opaque
  • 1 = transparent (e.g. like glass)
  • 2 = transparent but with no face culling of same neighbours (e.g. like leaves)
  • 3 = translucent, where texture's alpha is blended (e.g. like ice or water)
  • 4 = gas (e.g. like air)
FogDensity byte 0 Density of fog while client's camera is inside this block.

Value of 0 means "do not change fog" -- level's default settings are used. Values between 1 and 255 are mapped to OpenGL's GL_FOG_DENSITY value for GL_EXP2 style fog with the following formula:

GL_FOG_DENSITY = (x+1)/128

Thus value of 1 means density of ~0.0156, value of 127 means 1.0000, and 255 means 2.0000

FogR byte 255 Red component of the aforementioned fog. Only applies if FogDensity is above 0.
FogG byte 255 Green component of the aforementioned fog. Only applies if FogDensity is above 0.
FogB byte 255 Blue component of the aforementioned fog. Only applies if FogDensity is above 0.
Total Size: 80 bytes
RemoveBlockDefinition Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x24

(36)

BlockID byte 128 Between 128 and 255
Total Size: 2 bytes

BlockDefinitionsExt

This extension allows servers to define new block types with custom IDs and appearance, as well as the ability to redefine the properties of standard block types.
Motivation: To allow defining custom block types that do not have minX/Y/Z values of 0, and maxX/Z values of 1.
Client Behavior: See the BlockDefinitions specification. Additionally, this extension depends on EnvMapAppearance extension and BlockDefinitions, and must only be enabled if BOTH extensions are mutually supported.

Version 1 (Deprecated since 9 May 2016)

This version of the extension has been deprecated and replaced with version 2. See old extensions subpage.

Version 2

Texturing: See the BlockDefinitions specification. The MinX/Y/Z and MaxX/Y/Z fields also affect the location within the terrain tile for a given face that the block should sample texels from. (e.g. if minX and minZ was 8, and maxX and maxZ was 16, then for the terrain.png tile with pixels from (0, 0) to (16, 16), the top face would be drawn with the subset of pixels from (8, 8) to (16, 16))
Server Behavior: See the BlockDefinitions specification.


This packet is the same as DefineBlock packet, except the 'shape field' is replaced by 6 fields indicating the bounding box of the block in pixel coordinates, and the 'side texture' is replaced by 4 fields indicating the individual textures for each horizontal side face. Note that this packet does not support sprites, you must send a regular DefineBlock packet for that.

DefineBlockExt Packet
Server to Client
Packet ID Field Name Field Type Example Notes
0x25

(37)

Following fields from DefineBlock packet: BlockID, Name, Solidity, MovementSpeed, TopTextureID
LeftTextureId byte 0 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs. This is the texture ID for the X = 0 face.

RightTextureId byte 0 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs. This is the texture ID for the X = 1 face.

FrontTextureId byte 0 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs. This is the texture ID for the Z = 0 face.

BackTextureId byte 0 Refers to a terrain.png tile.

Between 0 and 255 (unsigned). Can be same as other texture IDs. This is the texture ID for the Z = 1 face.

Following fields from DefineBlock packet: BottomTextureID, TransmitsLight, WalkSound, FullBright
MinX byte 0 Minimum X coordinate in pixels. Min allowed is 0, max allowed is 15.
MinY byte 0 Minimum Y coordinate in pixels. Min allowed is 0, max allowed is 15.
MinZ byte 0 Minimum Z coordinate in pixels. Min allowed is 0, max allowed is 15.
MaxX byte 16 Maximum X coordinate in pixels. Min allowed is 1, max allowed is 16.
MaxY byte 16 Maximum Y coordinate in pixels. Min allowed is 1, max allowed is 16.
MaxZ byte 16 Maximum Z coordinate in pixels. Min allowed is 1, max allowed is 16.
Following fields from DefineBlock packet: BlockDraw, FogDensity, FogR, FogG, FogB
Total Size: 88 bytes

BulkBlockUpdate

Allows servers to send a single optimised packet that contains 256 block updates.
Motivation: Reduce bandwidth usage and increase responsiveness to clients during times of heavy block updates, e.g. for large cuboids or lava survival servers.
Client Behavior: When this extension is mutually supported, treat the packet in the same manner as a list of up to 256 SetBlock packets.
Server Behavior: When this extension is mutually supported, server may send BlockBulkUpdate packets to the client after the LevelFinalize packet for the current level has been sent to the client.

BulkBlockUpdate packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x26

(38)

Count unsigned byte 0 The number of block updates used in this packet - 1. (e.g. a value of 0 means 1 block update is used).
Indices byte array[1024] [52, 3443] A packed list of the indices within the current level of the blocks that are to be updated.

Each element is a 32 bit integer in big endian order.

Blocks byte array[256] [5, 10] A packed list of the new blocks to set at each corresponding index in the indices array.
Total Size: 1282 bytes

TextColors

This extension allows the server to define custom text colors.
Motivation: To allow parts of chat to be more distinctive, allow for more colorful chat, etc.
Client Behavior: Client must be able to receive SetTextColor packets at any time. Client must then draw text using the color specified in the packet, when the color code specified by the packet is encountered in any Message packet.
An alpha/opacity of 0 is treated as removing the custom colour code from the client's list of custom color codes.
Server Behavior: Server may send SetTextColor packets at any time.
Compatibility: Clients may choose to always draw text fully opaque, even if the custom text colour specifies a non fully-opaque color. These clients shall still be considered as compliant with the specification.
The color code in the SetTextColor must be greater than 0x20(space) and less than 0x7F(delete). Additionally, the color code must not be '&', '%', or in the range 0-9, a-f, or A-F, as they are used by the standard hex color codes.

SetTextColor packet

Server to client
Packet ID Field Name Field Type Example Notes
0x27

(39)

Red unsigned byte 255 Red component of the text color.
Green unsigned byte 0 Green component of the text color.
Blue unsigned byte 127 Blue component of the text color.
Alpha unsigned byte 255 Alpha/Opacity of the text colour, with 255 being fully opaque.
Code unsigned byte 63 ASCII character colour code, case sensitive.
Total Size: 6 bytes

Example: Suppose the server sends a SetTextColor packet of color #123456 and color code 'G'. When the client receives a Message packet with the text &fFoo&GBar, Foo is drawn using the color #FFFFFF and Bar is drawn using the color #123456.

EntityProperty

Allows servers to change the properties of entities, beyond changing their position and yaw/pitch.
Motivation: Allow for greater customisation, while also allowing for extension to more properties in the future.
Client Behavior: Client must be able to receive SetEntityProperty packets after the LevelFinalize packet for the current level has been received from the server.
Server Behavior: Server may send SetEntityProperty packets to the client after the LevelFinalize packet for the current level has been sent to the client.

SetEntityProperty packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x26

(42)

EntityID byte 0 Between 0 and 127
Property type byte 0 Enumeration of properties that can be changed
  • 0 = Model X rotation in degrees
  • 1 = Model Y (yaw) rotation in degrees
  • 2 = Model Z rotation in degrees
Property value int 45 New value for the given property.
Total Size: 1282 bytes

ExtEntityPositions

Expands entity positions from the range of [-1023, 1023] to [-6,7108,864, 67,108,864]
Motivation: Allows for players to interact and see other players properly on very large/tall/long worlds.
Client Behavior: Client must read 32 instead of 16 bit integers for the AddEntity, EntityTeleport, ExtAddEntity2 packets. It must write 32 instead of 16 bit integers for the Position and Orientation packet sent to the server.
Server Behavior: Server must write 32 instead of 16 bit integers for the AddEntity, EntityTeleport, ExtAddEntity2 packets. It must read 32 instead of 16 bit integers for the Position and Orientation packet received from the client.

Note: No new packets are defined by this extension, instead, the reading and writing behaviour of existing packets is modified. The behaviour change only applies to the X, Y, Z fields of the aforementioned packets.