Classic Protocol Extension

From wiki.vg
Revision as of 16:51, 29 September 2013 by F (talk | contribs) (→‎SelectionCuboid: formatting)
Jump to navigation Jump to search

Classic Protocol Extension (CPE) is a project to augment the Minecraft Classic network protocol. Extensions are designed to keep custom clients and servers compatible to standard/vanilla clients and servers. Standard clients and extended clients can play on the same server at the same time. Extensions are also designed to be modular: clients and servers can choose to implement any subset of extensions, and only mutually-supported extensions will be used.

This specification has not yet been finalized, and is subject to change.

Last revision: 3 September 2013

Support

These custom servers plan to add support for CPE: 800Craft, cloudBox, fCraft, FemtoCraft, GGS

These custom clients plan to add support for CPE: Charged Miners, ClassiCube, OpenClassic

Negotiation

CPE Negotiation.png

Client behavior: Extended clients must use magic number of 0x42 for the padding byte of the Player Identification packet. After the client has sent its identification packet, it must await a response. If server responds with any packet other than ExtInfo, client must assume that the server does not support CPE. If the server responds with an ExtInfo packet, client must parse it and any ExtEntry packets that follow. Client must then compare its locally-supported set of extensions with the list of extensions provided by the server, and find an intersection of these sets. These are the mutually-supported extensions. Client must now send ExtInfo packet of its own, followed by a list of zero or more client-supported extensions. After sending the last of ExtEntry packets, client should activate all mutually-supported extensions and resume normal login procedure.

Server behavior: All standard/non-extended clients pad this packet with 0x00, so extended servers can easily notice extended clients. All standard/non-extended servers will ignore the modified padding byte, preserving compatibility. When the server sees that padding byte is 0x42, it must immediately reply with an ExtInfo packet, followed by zero or more ExtEntry packets, and await a response (ExtInfo packet) from the client. Client will respond with one ExtInfo and zero or more ExtEntry packets. Server must then compare its locally-supported set of extensions with the list of extensions provided by the client, and find an intersection of these sets. These are the mutually-supported extensions. After receiving the last of ExtEntry packets, server should activate all mutually-supported extensions and resume normal login procedure.

ExtInfo Packet

Packet ID Field Name Field Type Example Notes
0x10

(16)

AppName string MyServer Client or server software name
ExtensionCount short 1 Between 0 and 32767
Total Size: 67 bytes

ExtEntry Packet

Packet ID Field Name Field Type Example Notes
0x11

(17)

ExtName string MyExtension Name of a supported extension
Version int 1 Only extensions with identical version numbers should be considered compatible.
Total Size: 69 bytes

Extensions

ClickDistance

Used to extend or restrict the distance at which client may click blocks, controlled by the server. Click range is given in player-space units (32 units per block). In Minecraft Classic, the default range is 160.
Motivation: This extension allows trusted players to have a wider or virtually-unlimited reach. It may simplify operation of certain bots. Restricting the reach may allow new games/mini-games.
Client Behavior: Upon receiving a SetClickDistance packet, client should immediately apply the change. Distance should persist between worlds/maps.
Server Behavior: Server should send SetClickDistance packet when the server connects, or whenever their permitted click distance changes. Server should allow for some margin-of-error (+/- 1 block) when enforcing click distance restrictions.

SetClickDistance packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x12

(18)

Distance short 160
Total Size: 3 bytes

CustomBlocks

Used to add support for custom block types. Custom block IDs start at 50 (0x32). New block types will be added in batches, a few at a time. Both client and server declare which batch they support, and use the lower of the two versions. Claiming to supporting a batch implies fully implementing all the batches that came before it. If either server or client do not support this extension, only the standard 50 block types should be used.
Motivation: Adding new visually distinct blocks, to enhance Classic players' experience.
Client behavior: Client must expect a CustomBlockSupportLevel packet from a compatible server immediately after sending the last ExtEntry packet. It should then reply with its own CustomBlockSupportLevel packet, containing its actual support level. Client must then use the lower of the two levels in operation. Client must not send any block types that are not defined by the current support level. Client should expect Heartbeat packet only AFTER sending its CustomBlockSupportLevel packet.
Server behavior: Server must send a CustomBlockSupportLevel packet to compatible clients immediately after receiving the last ExtEntry packet from the client. It should then wait to receive a CustomBlockSupportLevel packet from the client before sending the Handshake. Server must then use the lower of the two levels in operation. If this level is lower than the server's, it has to filter data sent to the client, to make sure that the client never receives any block types that it does not support. Each level will define what substitutions to use.

CustomBlockSupportLevel packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x13

(19)

SupportLevel byte 1
Total Size: 2

Blocks in support level 1

Client must be able to receive/render all 16 custom blocks to claim support. Server must be able to receive/store all 16 custom blocks to claim support.

CPE CustomBlocks Level1.png

Block name Block ID Fallback name Fallback ID
CobblestoneSlab 0x32 (50) Slab 0x2C (44)
Rope 0x33 (51) BrownMushroom 0x27 (39)
Sandstone 0x34 (52) Sand 0x0C (12)
Snow 0x35 (53) Air 0x00 (0)
Fire 0x36 (54) Lava 0x0A (10)
LightPinkWool 0x37 (55) Pink 0x21 (33)
ForestGreenWool 0x38 (56) Green 0x19 (25)
BrownWool 0x39 (57) Dirt 0x03 (3)
DeepBlue 0x3A (58) Blue 0x1d (29)
Turquoise 0x3B (59) Cyan 0x1c (28)
Ice 0x3C (60) Glass 0x14 (20)
CeramicTile 0x3D (61) Iron 0x2a (42)
Magma 0x3E (62) Obsidian 0x31 (49)
Pillar 0x3F (63) White 0x24 (36)
Crate 0x40 (64) WoodenPlanks 0x05 (5)
StoneBrick 0x41 (65) Stone 0x01 (1)

HeldBlock

Provides a way for the client to notify the server about the blocktype that it is currently holding, and for the server to change the currently-held block type.
Motivation: This allows server to know which block player is holding, for example for drawing commands, without needing to wait for the player's click. it also allows for features like /Spectate to show what block a spectated player is holding.
Client behavior: When this extension is mutually supported, client should use the Player ID field of the Position and Orientation packet (currently unused) to indicate which blocktype the client is currently holding. It should be ready to accept HoldThis packets to change the block that the player is holding. If 0 is given for BlockToHold, client should hide the hand/block from the screen, and should not be able to click blocks, until they switch to a different blocktype. If an unrecognized blocktype is given, no action is needed.
Server behavior: The server can use HoldThis packet to force the client to hold the desired block type. It should be done sparingly.

HoldThis packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x14

(20)

BlockToHold byte 49 Standard block type
PreventChange byte 0 0 = Allow player to change blocktype

1 = Prevent player from changing blocktype

Total Size: 2 bytes

EmoteFix

This extension indicates that the client can render emotes (ASCII control characters) in chat properly, without padding or suffixes that are required for vanilla client. This extension does not define any new packets.
Motivation: To improve appearance of emotes in chat.
Client behavior: Client should not emulate vanilla client's quirks.
Server behavior: Server should not pad or suffix emotes in chat.

TextHotKey

This extension allows the server to define "hotkeys" for certain commands.
Motivation: To speed up and simplify access to commonly-used commands and command macros by providing server-defined client-side hotkeys.
Client behavior: Client should not try to persist previously-defined hotkeys between sessions. When a defined hotkey is activated by the user, client should open up a text prompt and type in contents of the Action field. A newline character (\n) in the Action field indicates that whatever is currently typed-in should be sent to the server. If Action does not end with a newline, text prompt should be left open, for the user to complete. Client may provide a way for the user to see a list of currently-defined hotkeys, and a way to notify the user when a hotkey was activated.
Server behavior: The server should send a definition of each hotkey (SetTextHotKey packet) once per connection.

SetTextHotKey packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x15

(21)

Label string Copy Readable name of the hotkey
Action string /Copy Text to type in
KeyCode int 113 LWJGL keycode of the key
KeyMods byte 0 Key modifier flags, may be combined:
  • 0 = None
  • 1 = Ctrl
  • 2 = Shift
  • 4 = Alt
Total Size: 134 bytes

ExtPlayerList

Motivation: Provides more flexibility in naming of players and loading of skins, autocompletion, and player tab-list display. Separates tracking of in-game entities (spawned player models) and names on the player list. ExtAddPlayerName/ExtRemovePlayerName packets take over managing the player names list (tab-list), and ExtAddEntity/DespawnPlayer packets are used only to manage in-game entities.

Client Behavior

When ExtAddPlayerName packet is received for an unrecognized NameID, a new entry must be added to the autocompletion list and tab-list. When receiving ExtAddPlayerName packet for an already-listed NameID, client must update its ListName, GroupName, and GroupRank. Name list must persist when client changes worlds/maps.
Names on the tab-list should be grouped by GroupName in the player tab-list. Names within a GroupName should be sorted by GroupRank (in ascending order). Names with the same GroupName and GroupRank should be sorted alphabetically by ListName.
When an ExtAddEntity packet is received, it must be treated as the SpawnPlayer packet. InGameName should be shown above the player's heads in-game. Skin should be loaded using the given SkinName for a player name. When client receives ExtAddEntity packet for an already-spawned player, a duplicate entity must not be spawned and existing entity's position should not be changed. Instead their InGameName and SkinName should be updated. If a negative ID is given for ExtAddEntity, client must update player's own spawn point, InGameName, and SkinName. The client must ignore regular SpawnPlayer packets, if any are received. Name list should not be affected by ExtAddEntity.
Color codes may be either drawn or stripped from ListName, GroupName, and InGameName.
When a standard DespawnPlayer packet is received for a recognized EntityID, player model should be removed from a world. Name list should not be affected by DespawnPlayer.
When ExtRemovePlayerName packet is received for a recognized NameID, they should be removed from autocompletion list and tab-list. When DespawnPlayer or ExtRemovePlayerName packet is received for a negative or unrecognized PlayerID, no action should be taken.

Server Behavior

When a new player connects to the server, ExtAddPlayerName must be sent. GroupName and GroupRank can be used in any way, for example to group players by map/world or rank/class/faction. Server must use ExtAddEntity in place of standard SpawnPlayer packet. Server should re-send ExtAddPlayerName packet, using the identical PlayerID, when player's ListName, GroupName, or GroupRank change. Server must reliably send an ExtRemovePlayerName when the player disconnects. Color codes are permitted in ListName, GroupName, and InGameName.

ExtAddPlayerName Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x16

(22)

NameID short 5 Between 0 and 255
PlayerName string Notch Player name used for autocompletion.

May be left empty (exclude from autocompletion).

ListName string &c[Op]Notch Name displayed in the in-game list.
GroupName string Staff
GroupRank byte 0 Rank of a player within the group.

A lower number means higher rank.

Total Size: 196 bytes

ExtAddEntity Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x17

(23)

EntityID byte 5 Between 0 and 127
InGameName string &cNotch Player name to be shown in-game, hovering above player model.
SkinName string Notch Player name whose skin should be used by the client.
Total Size: 130 bytes

ExtRemovePlayerName Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x18

(24)

NameID short 5 Between 0 and 255

Matches NameID of the ExtAddPlayerName packet

Total Size: 3 bytes

EnvColors

This extension allows server to alter some of the colors used by the client in environment rendering.
Motivation: To allow the server to give worlds/maps a unique feel: time-of-day, weather/climate, lighting effect, etc.
Client behavior: Client must check for EnvSetColor packets right before Level Finalize packet, and apply these changes before the map is displayed. Client should be able to read this packet at other times, but it is not required to then apply the changes immediately. If an unrecognized or unsupported Variable field is given, no action is needed. If an out-of-range color is given by the server (i.e. if any of Red, Green, or Blue is less than 0 or greater than 255), then the specified variable should be reset to its default value.
Server behavior: Server should normally only use EnvSetColor packets right before the Level Finalize packet. To reset a variable to its default value, the server should send a packet with values -1 for Red, Green, and Blue.

EnvSetColor Packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x19

(25)

Variable byte 1 Enumeration of environmental variables
  • 0 = sky color
  • 1 = cloud color
  • 2 = fog color
  • 3 = ambient light (blocks in shadow) color
  • 4 = diffuse light (sunlight) color
Red short 25 Between 0 and 255
Green short 128 Between 0 and 255
Blue short 0 Between 0 and 255
Total Size: 8 bytes

SelectionCuboid

Motivation: Allows the server to highlight parts of a world. Applications include zoning, previewing draw commands, previewing undo commands.
Coordinates: {StartX,StartY,StartZ} are coordinates of the block inside the selection that is closest to the map origin. {EndX,EndY,EndZ} are coordinates of the block inside the selection that is furthest from the map origin. Therefore, the resulting selection has dimensions {EndX-StartX+1, EndY-StartY+1, EndZ-StartZ+1).
Client behavior: Client should be ready to receive MakeSelection packets any time after LevelFinalize packet. Supporting Opacity is optional: the client may opt to provide fixed opacity instead. Selections that extend outside the map may be either ignored or clipped to fit. Selections with inconsistent coordinates (e.g. where StartX<EndX) may either be ignored or re-ordered. Out-of-range values for Red, Green, Blue, and Opacity should be clipped to fit the valid range. When map changes (i.e. when LevelInitialize packet is received), all existing selections should be removed. RemoveSelection packets that refer to non-existent SelectionIDs should be ignored.
Server behavior: All given coordinates must be contained within the map. End coordinates should be higher or equal than start coordinates.

MakeSelection packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x20

(26)

SelectionID byte 0 Numeric ID of the selection. Between 0 and 127.
Label string SomeZone Text label associated with the selection
StartX short 1 X coordinate of the starting point
StartY short 2 Y coordinate of the starting point
StartZ short 3 Z coordinate of the starting point
EndX short 5 X coordinate of the ending point
EndY short 6 Y coordinate of the ending point
EndZ short 7 Z coordinate of the ending point
Red short 255 Between 0 and 255.
Green short 34 Between 0 and 255.
Blue short 128 Between 0 and 255.
Opacity short 255 0 = fully transparent

255 = fully opaque

Total Size: 82 bytes

RemoveSelection packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x21

(27)

SelectionID byte 0
Total Size: 2 bytes

BlockPermissions

This extension allows the server to instruct the player that certain block types are allowed/disallowed to be placed or deleted.
Motivation: To prevent players from inadvertently placing or removing prohibited block types (e.g. water, lava, grass, admincrete), before it even reaches the server.
Client behavior: Client should prevent placement of prohibited block types (by graying out or hiding blocks in block-selection screen, or any other effective means). Client should prevent player from deleting prohibited block types. Client must be ready to receive SetBlockPermission packet after map load (MapEnd packet). Permission changes should take effect as soon as packet is received. Admincrete (solid block) permissions set by SetBlockPermission must always override permission set by Handshake packet. If BlockType is set to 0, given permissions should affect ALL block types at once, overriding permissions set by any earlier packets. Permissions must persist between map changes. Client may optionally warn the player attempting to place/delete prohibited blocks via sound effect, visual effect, chat message, etc.
Server behavior: Server may send SetBlockPermission packets any time after map load (MapEnd packet). Any block type may be specified, including custom blocks (if CustomBlocks is mutually supported). Server must not assume that client is compliant/obedient, and server must still verify each SetBlock packet coming from the client. What to do with non-complying clients (kick or warn) is up to you.

SetBlockPermission packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x22

(28)

BlockType byte 8 Block's numeric ID (anything between 1 and max defined block).
AllowPlacement byte 0 0 = Prohibited

1 = Allowed

AllowDeletion byte 0 0 = Prohibited

1 = Allowed

Total Size: 4 bytes

ChangeModel

Client behavior: The client will receive a EntityID and a string value containing the model name. The client will then change the model of the player whose ID is the same as the received AddEntity or ExtAddEntity packet. The model name will be parsed by the model manager and the model changed in game. If the model does not exists in the model manager or is 0-length, change the model back to humanoid. Alternatively, you can send the client an int converted to a string which represents a valid Block ID.
Server behavior: The server will send a EntityID and then a ModelName to the client for a desired player. The model name must exist in the client and not be 0-length or default (humanoid) will be used instead.

ChangeModel Packet

Packet ID Field Name Field Type Example Notes
0x1D

(29)

EntityID byte 5 Between 0 and 127
ModelName string spider The name of the model to be used OR a valid Block ID as a string.
Total Size: 66 bytes

Available models

Client can render any or none of the below, but it is down to the client to handle what can and cannot be rendered if the packet is recieved
Model Name Model String
Chicken chicken
Block Model A valid block ID as a string
Creeper creeper
Crocodile croc
Humanoid humanoid (or an invalid model name)
Pig pig
Printer printer
Sheep sheep
Skeleton Archer skeleton
Spider spider
Zombie zombie

EnvMapAppearance

This extension allows the server to specify custom terrain textures, and tweak appearance of map edges.
Motivation: To provide more ways to customize map appearance, including functionality that's currently provided by World of Minecraft's scheme.
Client behavior: Client should expect EnvSetMapAppearance packets any time after the last LevelDataChunk packet for a level is received. If the TextureURL field is blank or if the given file could not be loaded for any reason, then the texture pack should be reset to client's default. If an unsupported block ID is given for SideBlock or EdgeBlock, it should be ignored. Given SideLevel value should be adjusted to fit between 0 and MapDepth, if necessary.
Server behavior: Server may send EnvSetMapAppearance packets any time the client expects it (see above). Server should not use any custom block IDs unless the client declared the appropriate CustomBlocks support level. To reset the texture pack to default value, server should send an EnvMapAppearance packet with empty string for TextureURL. To reset other fields, server should simply use the default values (listed below).

EnvSetMapAppearance packet

Server to Client
Packet ID Field Name Field Type Example Notes
0x1E

(30)

TextureURL string http://somesite.net/terrain.png Skin's full URL.

Must be an HTTP URL, ending with .png, and served with image/png mime type.

SideBlock byte 7 Block ID. Default value is 7 (Admincrete).
EdgeBlock byte 8 Block ID. Default value is 8 (Water).
SideLevel short 31 Elevation from bottom of the map, in blocks.

Value should be between 0 and MapDepth. Default value is MapDepth/2.

Total Size: 69 bytes